JBEC Professional CNC Routers Model 604012

The JBEC 604012 machine is the smallest machine we offer in the professional series. The specified travel is 600mm x 400mm in X and Y. If you are careful – you can realise up to 660mm x 420mm. See below for some images and videos of the JBEC 604012 CNC router. Please have a close look at all aspects of the machine and don’t hesitate to give us a call.

Machine travel

600mm (X) x 400mm (Y) x 125mm (Z). However, if you push her to her limits you can get 660mm x 420mm in the X and Y axes. Have a look here – you can see how the bed can be removed to allow for extra throat access for the Z-axis.

Spindle

The machine can be configured with either a single-phase Kress spindle – or a 3 phase high-frequency spindle (NOTE still running on a single-phase supply – through a VFD)

Feed Rates

We can machine at up to 4,000mm/min and in some cases higher depending on the materials and cutters used. An industrial production machine must be able to machine well in excess of 1,000mm/min and be able to support a high-frequency three-phase spindle.

Drive System

All our professional CNC machines run on ballscrews. Ballscrews are not “leadscrews”. Ballscrews are not “trapezoidal” lead screws. Ballscrews have circular grooved shafts with rolling recirculating bearing elements on the nut. Leadscrews are well known and are prone to backlash. See here for more information. While software can be used to eliminate “backlash” generated when using leadscrews/trapezoidal screws – we believe its best to minimise the backlash with hardware – hence we use ballscrews where the backlash is at a minimum. They don’t wear out as quickly – are virtually maintenance-free and are THE most accurate method of driving a CNC router.

Software

We offer a fully supported, integrated complete solution. The CAD/CAM and control software we use can be installed on any Windows-based PC/Laptop. We don’t believe is a disconnect between the machine and the system to generate the toolpaths. With our integrated solution you can design, setup and machine all from one PC. This makes changes possible in seconds. No USB flash drive needed.

See below for some samples made on the JBEC professional CNC router series

Videos

Make It Stand Out

It all begins with an idea. Maybe you want to launch a business. Maybe you want to turn a hobby into something more. Or maybe you have a creative project to share with the world. Whatever it is, the way you tell your story online can make all the difference.

See below for images of the JBEC 1259012 system