Mill-it-Mega CNC milling machine Specifications | CNC milling specs |
---|---|
Travel in X Y and Z axis | 700mm x 320mm x 250mm |
Carcass build configuration | Welded steel frame, heat treated, filled with polymer concrete resin and datum skimmed on VMC |
Tslot table size | Anodised Aluminium Tslot table 1000mm x 250mm, Tnut type M6, Very high quality Aluminium Tslot table. |
Overall footprint | 800 x 1300mm (With the table in the middle) |
Bottom of collet to Tslot table height | 250mm – Travel brings collet to the Tslot table |
Rapid Feed rate | 3,500mm/min (58mm/sec) High acceleration rates of 350mm/sec/sec possible depending on what is loaded on the table. This allows very fast 3D prototyping in Aluminium. With the servo upgrade 10,000mm/min and higher achievable. |
Spindle Options | 750Watt (Er20 collet) | 2kW (ER25 collet) | 3KW (ER32 collet) (Three phase required for the 3kW spindle) All models very high quality spindles fully balanced. ATC options available on demand. |
Spindle RPM and torque | All spindle have full stated power at 12,000-24,000RPM. All fully software controlled for on/off and speed in RPM. |
Machine Weight | 250kg – due to very heavy stiff carcass filled with polymer concrete resin. |
Software Compatibility | Ethernet connectivity to UCCNC controller |
Drive system Electronics | 75V DC Nema 34 4NM stepper motors (Very high speed Delta servo options available) |
Limit and homing sensors | Highest quality IP67 homing sensors fitted. Sealed high quality PUR cable routed the limit switch cables to the controller and they run on 12VDC. Very robust. |
Control System | Machine comes as standard with full controller system with integrated 3 Axis and spindle control – carcass only available on request |
Linear motion system | Profiled linear rails all mounted on Datum surfaces precision CNC milled. |
Coolant | Fully compatible with the Fogbuster sprayer system and can be configured to run flood coolant also |